Architect
case with precious stone cut
Antec
has introduced another tower at the Computex 2014 in Taipei. With a
cautious plan and an aluminum board, the P380 is intended to engage
aficionados.
Antec Performance One P 380
 |
| Antec P380 |
Aluminum
wrap up
The
front and the cover are secured with a 6 mm thick aluminum dress. The
edges are refined with a precious stone cut and make a decent
impression. All together not to meddle with the shut front and the
line direction, the utilization of 5.25-creep mounting sections was
abstained from. An optical thin drive can be utilized horizontally.
It doesn't make a difference which side, however just the completely
secluded drive confine must be pivoted. The front board additionally
needed to go to the side. Notwithstanding the two obligatory sound
jacks, two USB 3.0 and USB 2.0 interfaces are accessible.
Internal
space
The
inside obliges mainboards in ATX, Micro-ATX, Mini-ITX and even E-ATX
standard. In the event that you would prefer not to depend on air
cooling, but instead work with water, you can introduce up to two 360
mm radiators, which are settled in the front and on the lodging
spread. There are likewise up to seven lodging fans accessible.
1x120mm in the back, three times 120mm or twice 140mm each at the
front and top. The hard circle confine suits up to nine 3.5 or
2.5-crawl hard drives. With a specific end goal to give enough free
space even to realistic cards, the center part can be totally
evacuated. On the off chance that everything works out as expected,
the lodging is required to come in mid September 2014 for around 229
euros in the exchange. The early introduction makes you need more.
ConversionConversion EmoticonEmoticon Off Topic